TNG Installation Instructions

Hi, and welcome to the TNG installation guide!

Files
Permissions
1. 1. Explanation of "Permissions"
2. 2. Setting Permissions
3. 3. Advanced Settings
Folders
1. 1. Creating Folders
Database Tables
1. 1. Establish a Database Connection
2. 2. Create the Database Tables
Other Settings
1. 1. General Settings
2. 2. Chart, Import, Log and Map settings
Your Data
1. 1. Setting up Users
2. 2. Setting up Trees
3. 3. Importing a GEDCOM
4. 4. Custom Event Types
5. 5. Manual Data Entry
6. 6. Secondary Processes
7. 7. Media (Photos, Histories, Headstones, etc.)
8. 8. Utilities: Backup/Optimize/Restore
Customizing Your TNG Pages
1. 1. Templates
2. 2. Style Sheets
3. 3. Header, Footer and "Meta" Files
4. 4. Home Page
Final Notes
Appendix

Single-page installation guide (show everything at once) | Hide all

TNG Support: [email protected]
TNG Forum: http://tngforum.us
TNG info: http://www.tngsitebuilding.com
PHP info: http://www.php.net
MySQL info: http://www.mysql.com

Product Updates:
[email protected]
User Discussion:
[email protected]

Discussion List Options
Discussion List Archives

Files

Step 1: Extract Files

IMPORTANT: This is the FULL INSTALLATION guide. If you are upgrading an existing installation, please exit this page immediately and refer instead to the readme file that came with your upgrade!

If you downloaded TNG from the Internet:
The file you downloaded is a zip file, which means it actually contains quite a few files all "zipped up" together. Please find this file and unzip or extract the included files to a new folder or directory (name doesn't matter) on the hard drive of your local computer. Your operating system may be able to handle this operation, but if not, there are several specialized utilities can find on the Internet to do this job for you. A few you might look at are WinZip or PKZip for Windows, or ZipIt or StuffIt for Mac.

Some files should extract into subfolders called "admin", "googlemaps" and "English". If you don't see these folders after performing the extraction, please delete the files you extracted and perform the extraction process again.

If you obtained TNG on a CD:
All the files you need are already extracted in the proper folders on the CD. You will also have folders for alternate language packs and pre-built templates. You can copy everything to a new folder on the hard drive of your local computer if you wish, but it isn't necessary.
Next >>
Files

Step 2: Connect to Your Remote Web Site

Connect to the remote web site where you plan to install TNG. This could be done using a control panel file manager shown to you by your hosting provider, or using an FTP program (FTP stands for "File Transfer Protocol"). If you use the FTP method, you will need to know your FTP host name, username and password.

Once you get to your site, navigate to the folder where your site's home page resides. From here on, we will refer to this folder as the root folder (even though it probably isn't called that). If you're setting up a new site, the folder might be called "www", and your home page will likely be called "index.html", "index.htm" or "default.htm.
<< Prev Next >>
Files

Step 3: Setting up Your Remote Environment

Now that you've found your root folder, you need to decide whether you want your web address to point directly to your TNG installation, or if you want to keep a separate home page.

If you want your address (ie, http://www.yoursite.com) to take you directly to your genealogy, you will need to delete any existing home page or plan to merge it with TNG's home page, which is called "index.php". You will be installing TNG in the root folder, so you can then skip the rest of this step. For you, the root folder and the genealogy folder will be the same.

If you plan to set up a larger environment of which genealogy is just one section, you might want to create a subfolder on your site to hold your TNG files. You can name this folder anything you'd like, but we will refer to it from here on as the genealogy folder.
<< Prev Next >>
Files

Step 4: Copying Files to Your Site

If you are using a web-based file manager:
First you will need to create four new folders on your remote site within the genealogy folder. Call these subfolders admin, googlemaps, font and English. Be sure to spell these correctly and to use the proper case (for example, "English" instead of "english").

Now copy all the extracted TNG files from your local computer to your remote site, putting all files in their respective folders. All files not in a subfolder should go in your genealogy folder.

If you are using an FTP program:
Select all the extracted TNG files and folders from your local computer and copy them to the genealogy folder on your remote site. The admin, googlemaps, font and English folders will be created for you on the remote site. If your FTP program does not allow you to copy folders, follow the instructions above under "If you are using a web-based file manager."

IMPORTANT: If you are viewing this "readme" page on your home computer, finish this step and then load the readme.html page from your remote site instead. Use http: (NOT ftp:) to load the page in your web browser. The file should now be in your "genealogy" folder. This will make the rest of the installation much easier.
<< Prev Next >>
Permissions

Step 1: Explanation of "Permissions"

You will now be asked to set the "permissions" on some files and folders. If you have a good understanding of permissions, please feel free to skip over this explanation to the next step. Otherwise, please read this. You may be able to set your permissions with the click of a single button in the next step, but you will still benefit from this explanation.

So what are permissions? Permissions dictate who can do what with which files. In other words, you can say who has "permission" to write to or read from a certain file. TNG requires that everyone be able to write to some files and folders, so we will need to set those permissions accordingly.

Some people like to refer to these permissions as a three-digit number. Others prefer a string of "rwx" characters, and still others just speak of "read, write and execute". When you are setting permissions, you may encounter any of these three methods.

With each permission you set, you are granting rights to three different entities: the "owner" (that's you), the "group", and the "world" (includes all visitors to your site, even you). That's why permissions always come in groups of three.

If you follow the number method, each number represents a sum of read, write and execute for the different entities. Read = 4, Write = 2 and Execute = 1, so if we tell you to set a file to "664", it means that the owner and group will have Read and Write permissions (4+2), the world will have only Read permissions (4), and no one will have Execute permissions.

Using the "rwx" method, 664 would then be represented as rw-rw-r-- (the "-" character means that a permission is omitted).

Note: Mac OS X users could use the DonationWare software called BatChmod (available at VersionTracker.com or MacUpdate.com) to do the permissions settings in a user-friendly environment.
<< Prev Next >>
Permissions

Step 2: Setting Permissions

If you are viewing this page from your web site, you may be able to set all required permissions by clicking this button (go ahead and try it):

If that operation was successful, you can skip the rest of this step (although it might be interesting reading anyway, and it would fill you in on what just happened). Otherwise, please continue.

1. Within your genealogy folder, find the files config.php, genlog.txt, importconfig.php, logconfig.php, mapconfig.php, pedconfig.php, subroot.php and whatsnew.txt and give them all Read/Write permissions (664, or rw-rw-r--) using your file manager or FTP program. Each FTP program or file manager is different in the method used to set permissions, so please ask your hosting provider or read the documentation on your software for more detailed instructions if necessary.

2. Now navigate to your remote admin folder and find the file there called genlog.txt (yes, there are two different files with this name). Also give this file Read/Write permissions (664, or rw-rw-rw--).

NOTE: In some cases, 666 permissions may be required for each of the files mentioned above (or rw-rw-rw-).
<< Prev Next >>
Permissions

Step 3: Advanced Settings

If you are not your own site administrator (you're using a hosting provider), you will not have access to your PHP configuration, so you can skip this step.

Otherwise, please make sure that your php.ini file (part of PHP, not TNG) contains the following settings:

file_uploads = On
error_reporting = E_ALL & ~E_NOTICE

If you have PHP 5, please make sure you use extension=php_mysql.dll and copy lib-mysql.dll to where PHP can find it.

If you can find a line in php.ini referencing the value LimitRequestBody then comment it out or delete it, as this will prevent you from uploading files larger than the size indicated on that line (sometimes this value is located in the php.conf file, so look for it there if you don't find it in php.ini).

You may also wish to increase the value for upload_max_filesize if you have a large GEDCOM file. It could also be advantageous to set output_buffering to "On".

If your PHP installation is on a Windows machine, you may have to change the session.save_path variable to point to your Windows temporary folder (i.e., C:\Temp). If you make changes to your php.ini file, you must restart your PHP service before the changes take effect.
<< Prev Next >>

Database Tables

Step 1: Establish a Database Connection

It is now necessary to establish a connection with your MySQL database. This database must be created before proceeding! In most cases your provider will already have created the database for you. If not, your provider will likely have given you access to an online "control panel" that you can use to create the database yourself. TNG cannot create it for your, so please make sure that you have a database, then return to this step.

Next, you will need to enter the correct database connection information here before TNG can do anything besides let you edit the settings. If you don't know the requested information, please ask your hosting provider to give it to you. Here's a brief description of each item:

Host Name: The computer where your database resides. It's usually the same one your web site is on, so the value here is most always "localhost" (no quotes).

Database Name: Sometimes a hosting provider will set up a database for you and will tell you the name. Other times they will expect you to create your own database using your "control panel". TNG will attempt to do that for you here if the database name you enter does not exist, but in many cases the host will not let this happen from a script. If that's the case, you will need to create an empty MySQL database using your control panel and give it a name yourself before entering the information below.

Database Username & Password: This information is specific to the database and may be different than any other username & password your host has given you. If you had to set up the database yourself, you may also need to set up a user and give it a name and password. If so, make sure you give this user ALL rights and assign it to the database. The assignment may be a separate step.

Enter your information here, then click "Save and Verify" below:

Host Name:

Database Name:

Database Username:

Database Password:

This information should have been saved in your TNG General Settings. You can enter the information directly by going to the Admin area at http://www.yoursite.com/genealogy/admin/index.php (if you're reading this from your web site, click here: admin/index.php. From there go to "Setup" and click on "General Settings."

What might cause this operation to fail? Here are some things to watch for:

1. Always check to make sure you have spelled everything correctly and have the right case.
2. Some database utilities add a prefix to your database and/or username. You may think you set up a database named "genealogy", but in reality it may have been named "prefix_genealogy". Be sure to look at what was created to make sure you have the right name.
3. Sometimes the host name requires a port number (ie, "localhost:3306") or a socket path (ie, "localhost:/path/to/socket"). Check with your hosting provider.
4. Some providers require that your database name and your database username are the same. Others make your control panel username/password match your database username/password.
5. You may have just forgotten to assign the user to your database.
6. If you are running MySQL 4.1 with anything less than PHP 5, the difference in password authentication schemes could cause a problem. Check here for instructions on how to fix this: http://dev.mysql.com/doc/mysql/en/Old_client.html
<< Prev Next >>

Other Settings

Step 1: General Settings

There are other general settings you can change if desired. To see these settings, go to the Admin area at http://www.yoursite.com/genealogy/admin/index.php (if you're reading this from your web site, click here: admin/index.php. From there go to Setup and click on General Settings. Please see the Help link on that page for detailed information on each option

Make changes to the General Settings as needed. You shouldn't need to change any of the table names. Click the Help link at the top of the page for an explanation of each field. You can come back and make changes here at any time.

NOTE on the Root Path setting: The value you see here the first time should be the correct value, so you shouldn't have to tamper with this. If you do, you can retrieve the original value by blanking out the value and saving the page. You must then return to the Settings page and save it again.

NOTE on the Config Path setting: This allows you to indicate a path "beneath" the root for your writable configuration files. Entering a value here is completely optional. You should enter a path ONLY if you are able to move the files named on the screen to the proper location.

NOTE on the Language setting: This is your default language. If you want your default language to be something other than English, you must first create a folder for that language and have the appropriate language files in that folder before changing this value. When you're ready, change this value to the name of the folder where your default language files reside. Do not put spaces in the language folder names. Be sure to match the case exactly. Others will now see this language first when they visit your site. Since TNG remembers your most recent language every time you log in, you will still need to use the language dropdown box to switch to your new language the first time.

When you're finished, be sure to click the Save button to save your new settings.
<< Prev Next >>
Other Settings

Step 2: Chart, Import, Log and Map settings

To set options in other areas, go back to the Setup page, then:

Select Chart Settings to set up all pedigree chart variables. Edit the settings to reflect your web site's overall style and to accommodate your data. An extensive help file is accessible from this page to explain all options found there. You only need to do this if you don't like the current way pedigree charts are displayed, and you don't have to do it now if you're not sure what the effects will be.

Select Log Settings to set up all log-related variables. Remember to read the Help screen for information on each setting.

Select Import Settings to set up all import-related variables. Again, be sure to read the corresponding Help screen for information about anything on this page. If you are planning to import a GEDCOM file that contains links to photos and/or histories, pay special attention to the fields labeled Local Photo and Local History paths.

Select Map Settings to set up all map related variables. You must get a "key" from Google in order to use Google Maps on your site. You can obtain a key here: http://www.google.com/apis/maps/signup.html.
<< Prev Next >>
Your Data

Step 1: Setting up Users

From the Admin main menu, go to the Users area and click on the Add New tab to set up at least one user. A "User" can represent one or more people with the same access rights. Until you have at least one user, your Administration area will be wide open to all visitors, and all visitors to the public part of your site will be able to see all data for all individuals.

You may add as many users as you like, but the first user you add MUST be an administrator (that's you). An administrator must have Add, Edit and Delete rights and must not be assigned to a tree. On the first user you won't even have the option to assign a tree. Since you haven't set up any trees yet, you won't be able to assign users to trees just yet anyway.

If you do not create an administrator first, or if you delete your administrator user, you may have trouble getting back here!

Only an administrator will be able to access system-wide functions like the Setup or Users. Only users with some combination of Add, Edit and Delete rights will be allowed into the Admin area. Assigning a user to a tree or branch limits that user's rights to their assigned tree or branch.

You don't have to set up any users at all, but if you don't, we strongly recommend that you password protect the Admin folder. Most hosting providers allow you to do this via their web-based control panel. If you don't have access to such a control panel, ask your hosting provider how to password-protect a folder. Also note that if you don't have any users, living data will be accessible to all visitors.

Again, see the Help on this page for more information.
<< Prev Next >>
Your Data

Step 2: Setting up Trees

From the Admin main menu, go to the Trees area and click on the Add New tab to set up at least one tree. A "Tree" is defined as an independent data set, or a group of individuals, families and sources that is independent from any other such group.

Do you need multiple trees? Data from one tree cannot be linked to data in another tree, so the rule of thumb here is that if any links exist among your potential trees, the data really should be merged into one tree. Most people will only need one tree unless they are planning to maintain separate and independent GEDCOMs.

The first two fields (Tree ID and Tree Name) are required, but everything else here is optional. You will not be able to edit the Tree ID after you save this page. It should be a short identifier with no spaces. It will not be displayed on any public pages.

Do not set up branches at this time. Come back to do that after importing or entering your data.
<< Prev Next >>
Your Data

Step 3: Importing a GEDCOM

If you are not planning on importing any data from a GEDCOM file, you can skip this step. Otherwise, go back to the Admin main menu and click on Import/Export to prepare to import your GEDCOM file. Your file must be in standard 5.5 or 4.0 format, and you can import it directly from your local computer or from the "gedcom" folder on your remote site. Please read the Help file linked to from this page for detailed information about all import options.

If you are using multibyte characters in any part of your file (for example, characters you can't find on a standard Western keyboard), you should also be careful to use the ANSI character set when creating your file. Some genealogy programs will call this the "Windows" character set.

If your GEDCOM file is large, the import may not finish. You will know the import has finished when you see a "Finished" message with the number of people, families and sources that were imported. If your import does not finish, your host may have a limit on the size of uploaded files. If you cannot resolve this with your site administrator, copy the GEDCOM file to the "gedcom" folder. Then proceed to import the file, leaving the first field on the Import screen blank (see the Help on that page for more details).

If the import begins but halts before you see the "Finished" message, your web server may be killing the import to save resources for other processes. If this happens, make sure your GEDCOM file is in the "gedcom" folder on the remote site, then return to the Import Settings and check the box labeled "Save Import State". Finally, try your import again. This time you will see a link at the top of the page that says, "If Import fails, click here to resume." Click on that link and the import will begin again at the point it stopped. You might have to click this link multiple times, depending on how large your file is or how concerned your host is about resources.

If your GEDCOM included media links, you will need to upload the actual files manually to the appropriate TNG folders (e.g., "photos") that you created earlier. Be sure to preserve any existing file structure from your Local Photo and Local History paths (See Import Settings) if that's important to you.
<< Prev Next >>
Your Data

Step 4: Custom Event Types

TNG maintains the most commonly used GEDCOM tags (ie, Birth, Death, Marriage) as "standard", meaning they are always imported every time. All others, including proprietary tags specific to certain software packages, are deemed "Custom Event Types". Events of these types are not imported or displayed until you tell TNG to "Accept" them.

The easiest way to set up all your needed Custom Event Types is to import your GEDCOM file using the "Only import Custom Event Types" option before importing the rest of your data. After that, go to the Custom Event Types area on the Admin main menu. All Custom Event Types used in your GEDCOM will be displayed there, but all will be set to "Ignore". Edit each ones you want to import and switch the flag from "Ignore" to "Accept". Also change the "Display" field to something more readable (for example, change "OCCU" to "Occupation". You may enter a different Display message for each language you are supporting. Do not change the "Type/Description" field.

Once you've made your desired changes, import your GEDCOM file again (this time without checking the "Only import Custom Event Types" box) to see the custom events imported and displayed, along with your other data.

You can also elect to import and "Accept" all Custom Event Types automatically.
If you're not importing a GEDCOM file, or if you'd rather set up Custom Event Types by hand, you may do so by going to Admin/Custom Event Types. See the Help file on that page for more information.
<< Prev Next >>
Your Data

Step 5: Manual Data Entry

If you are planning to enter your data manually, choose People, Families, Sources or Repositories from the Admin main menu to get started. Everything should be fairly self-explanatory, but all pages have associated help files you can use if you need them. There are no rules as to whether you should enter people or families first. It's up to your personal style and preference.
<< Prev Next >>
Your Data

Step 6: Secondary Processes

After importing or entering your data, go back to the Import/Export area and click on the Secondary Processes tab to perform various additional functions. See the Help file on this screen for detailed information on each process. For example, click "Track Lines" to trace the lines of descent within your genealogy. This places a small mark next to children in a family group who have offspring of their own, allowing users to more easily follow your lines of descent.

If your desktop software did not sort children or spouses according to birth or marriage date, you can use the "Sort Children" or "Sort Spouses" utilities to do that now.

From this area you can also create a GENDEX file to enable your site to be indexed on the TNG Network.

Another option here is "Relabel Branches". (You can create "Branches" in a tree in order to confine user rights to only a part of that tree. To create branches in a tree, go back to Trees, then click the Branches icon for that tree.) If you re-import your data with the "Replace All Data" option after setting up your branches, your branches will be removed during the import. Use the "Relabel Branches" feature to put them back.
<< Prev Next >>
Your Data

Step 7: Media (Photos, Histories, Documents, Headstones, etc.)

Media links may be imported as part of your GEDCOM file, or you may set them up manually using the Admin menu. If you import these items with your GEDCOM, you will still need to copy the actual files to the corresponding TNG folders (e.g., "photos", "histories" or "documents").

"Cemeteries" are not supported as separate entities by the GEDCOM standard, so these will not be imported in a GEDCOM file as such. You will need to use the Admin menu to set them up. If you had links to photos of headstones in your GEDCOM, they will be imported as "photos". You can then use TNG to convert them to "headstones". See the Help under Admin/Media for more information.

All media must have a unique physical path and file name. Because of that, you will see an error message if you try to add a second record for the same file name.

Media may be linked to individuals, families, sources, repositories, events and places. All media links may be imported from a GEDCOM file, with the exception of media linked to places.

Links to media are held in separate tables, so re-importing your GEDCOM will not break these links unless the ID numbers in your GEDCOM have changed since your last import. You should verify they are the same before re-importing. NOTE: if you imported these items with your GEDCOM and have changed your Root Path since then, importing these items again will create duplicates. To avoid this, click the option on the Import screen to ignore media present in the GEDCOM.
<< Prev Next >>
Your Data

Step 8: Utilities: Backup/Optimize/Restore

It is recommended that you back up your table data regularly using the Backup utility. This will create a series of .bak files in the "backups" folder. If possible, it is also recommended that you set permissions on the "backups" folder to 771 (rwxrwx-x) for maximum security (must be done *after* backups have been created). To avoid data loss in the event of a server crash, copy or move these .bak files down to your local computer.

If your data becomes corrupted or lost, you can use the Restore utility to bring it back.

The Optimize utility can be used to speed up your data access by removing slots for deleted records.
<< Prev Next >>
Customizing Your TNG Pages

Step 1: Templates

An easy way to quickly give your site a professional look and feel is to install one of TNG's pre-built templates. The templates are available in the main TNG zip you just downloaded, and on the TNG downloads page. Simply choose the one you want, then copy the files (unzip them first if you're downloading them separately) to the genealogy folder on your site. Some of the files will replace files you already have there.
<< Prev Next >>
Customizing Your TNG Pages

Step 2: Style Sheets

Even if you use one of the pre-built templates, you may want to make changes to fonts, colors, text sizes and other style elements. All of these aspects are controlled by "style sheets". Style sheet files end with the .css extension. The core style sheets used by TNG are genstyle.css (general rules) and tngtabs1.css/tngtabs2.css (two different tab styles). Each template also includes its own copy of a file called templatestyle.css that overrides the blank default copy (that comes with the main TNG zip file) and some of the style rules from genstyle.css. If you want to change the existing style rules from either of those files or add your own style rules, you should make those changes in the file called mytngstyle.css, as that file will not be overwritten in future updates. To make changes to mytngstyle.css, simply open it in a text editor, make your changes, then save the file back to your web site. If you want to redefine a style block from genstyle.css, just copy it from that file into mytngstyle.css and add your own changes. Anything you redefine in that file will take precendence, so only copy the lines you want to change. Some comments are included in genstyle.css to help you know which lines control what elements. If you're not sure what you can do in a style sheet, we recommend you try http://www.htmlhelp.com/reference/css, or simply search the Internet for "style sheets help").

Tabs: Some TNG pages have a series of tabs across the top. You can choose from two different tab styles (see the General Setting page for more information). If you choose the square style, you can change the colors of these tabs in the "tngtabs2.css" file. You will want to make your "active" tab match the "fieldnameback" definition from genstyle.css, and you will want to make your "inactive" tab match the "databack" definition from genstyle.css.

If you choose the slanted tab style, you can change the attributes in "tngtabs1.css", but the colors are made from image files. To create new tab images in a different color, make sure your "photos" folder has been made writeable, then go to the page switchcolor.php in your browser (http://www.yoursite.com/genealogy/switchcolor.php). If you're reading this page from your web site, click here: switchcolor.php. You will see a utility that will help you create new tab images. Again, you will want to make your "active" tab match the "fieldnameback" definition from genstyle.css, and you will want to make your "inactive" tab match the "databack" definition from genstyle.css.If the utility does not work for you, you may not have the GD image library installed on your web site. Try creating the tabs here instead: http://lythgoes.net/genealogy/switchcolor.php.
<< Prev Next >>
Customizing Your TNG Pages

Step 3: Header, Footer and "Meta" Files

If you have other style sheets you want to add, or if you have scripting code or meta tags you want to place on all your TNG pages, add them to the TNG files called meta.php (public pages) and admin/adminmeta.php (admin pages).

To change the appearance of the header that appears on all TNG pages (except the home page), edit topmenu.php (the default "Custom Header" file) in a text or HTML editor and customize as needed. The contents of this file will include the opening BODY tag.If you decide to use a different file for your Custom Header, you will need to indicate that in the General Settings in the Custom Header field.

To change the appearance of the footer that appears on all TNG pages (except the home page), edit footer.php (the default "Custom Footer" file) in a text or HTML editor and customize it in the same manner. The contents of this file will appear on each page just before the closing BODY tag. If you decide to use a different file for your Custom Footer, you will need to indicate that in the General Settings in the Custom Footer field.

Things to note about these pages:
1. They are actually only page fragments, meaning that they are pieces of HTML and not complete HTML pages. If you open them in a "smart" editor like FrontPage, it may try to "fix" these fragments by adding back the "missing" pieces. It is therefore recommended that you first open them in a text editor or save a backup copy just so you can compare before and after and delete any elements that are added back. For instance, the topmenu.php file contains a <BODY> tag but no ending </BODY> tag. If the </BODY> tag is added back, your pages may not display properly.
2. You may rename these files if you want. If you do, be sure to put the new names in the appropriate fields on the General Settings page. Maintaining ".php" as the file extension is essential if you plan to include any PHP code.
<< Prev Next >>
Customizing Your TNG Pages

Step 4: Home Page

Your home page for TNG is called index.php. If you had a prior home page called "index.htm" or "index.html", you may have to remove it in order for your new home page to be displayed when your domain name alone is entered into a browser.

To customize your home page, open index.php in your text or HTML editor and make changes as needed. You may rename it, but if you do you will also need to indicate the new name in the General Settings. If you are planning to use TNG as a Nuke module, you will want to use and customize the version of this file that comes with the TNG Nuke Add-on instead.
<< Prev Next >>
Final Notes

Searching:
When doing a simple search from the default "home page" (index.php), TNG looks to see if the search terms are "contained" in the corresponding fields of the target records. In other words, a search for "Ed" will find "Edward", "Fred" and "Cedrick". This is intentional so that as many results as possible will be returned. If you wish to limit responses to those that start with the search term(s), simply edit the index.html file and include the following hidden fields in the form: lnqualify (for surnames; value="starts with") and fnqualify (for given names; same value). This will coerce the search to find results where the beginning of the data starts with the search term(s). This also has the additional benefit of significantly improving performance during the simple search. If you have a large database, this might be something to consider.

RSS:
To use the RSS newsfeed feature, open your favorite RSS reader and subscribe with this URL: http://yourdomain.com/yourgenealogyfolder/tngrss.php. You can make the feed appear in a different language by appending "&lang=yourlanguage", where "yourlanguage" is the name of the language in TNG.

Timelines:
Depending on your margins or sidebar width, you may find that the bars on the timeline do not line up correctly with the year markers. If this is the case, please edit the file timeline2.php and adjust the values $lineoffset, $chartwidth, $checkboxcellwidth and $division as needed.

Files to Delete:
When you're done with the installation, there are some files you should probably remove from your site in order to provide greater security. Those files are: historytemplate.php, readme.html (this file), tnginstall.php and appendix.html
<< Prev Next >>
Appendix

Appendix (list of files)
<< Prev

TNG Installation Instructions

Files

Files

Files

Files

Permissions

Permissions

Permissions

Folders

Database Tables

Database Tables

Other Settings

Other Settings

Your Data

Your Data

Your Data

Your Data

Your Data

Your Data

Your Data

Your Data

Customizing Your TNG Pages

Customizing Your TNG Pages

Customizing Your TNG Pages

Customizing Your TNG Pages

Final Notes

Appendix